INCREASING UTILIZATION OF PRODUCTION MACHINERY THROUGH LINE BALANCING APPROACH (CASE STUDY ON PHARMACEUTICAL INDUSTRY)
DOI:
https://doi.org/10.31933/dijemss.v2i6.929Keywords:
Line Balancing, ECRS, Line efficiencyAbstract
The growth in sales volume of unbranded generic products (considering that drugs served by BPJS Kesehatan refer to the National Formulary and e-catalogs set by the government) has led to a decline in margins as price competition intensifies. The purpose of this research is to optimize the utilization and efficiency of the machine, increase productivity and balance the line. Improvements are made by following the ECRS (Eliminating, Combining, Rearranging, and Simplify) based line balancing concept. From the improvements that have been made to the granulation process, it was found that the time of the wet mixing process, wet sieving, drying, and dry sieving had decreased. Cycle time decreased, output increase, the total granulation process time “Product F” decreased. Line efficiency increased, balance delay decreased and smoothness index decreased. This shows that the granulation line is getting more balanced
References
Amran, TG & Novia, CW. 2018. Perbaikan Proses Produksi Pengereman Kendaraan Bermotor Dengan Metode Ecrs-Based Line Balancing. Seminar Nasional Pakar Ke 1 Tahun 2018, Buku 1, pp:193-204.
Betancourt, Liliana Capacho. 2007. ASALBP: the Alternative Subgraphs Assembly Line Balancing Problem - Formalization and Resolution Procedures. Doctoral Thesis, TECHNICAL UNIVERSITY OF CATALONIA. Page: 7-8.
BPJS Kesehatan. 2020. Ringkasan Eksekutif Laporan Pengelolaan Program dan Laporan Keuangan BPJS Kesehatan tahun 2019 (Auditan). Upload Date : 28 Jul 2020, https://bpjs-kesehatan.go.id/bpjs/arsip/categories/MzA/ publikasi.
Chueprasert, M. and *Ongkunaruk, P. 2015. Productivity improvement based line balancing: a case study of pasteurized milk manufacturer. International Food Research Journal Vol. 22, no.6, pp: 2313-2317
Ejsmont, K, Bartlomiej, G, Donatella C, Fernando C, Wael, MM,& Jose, L, Martinez, L. 2020. Towards ‘Lean Industry 4.0? – Current trends and future perspectives. Cogent Business & Management. Vol 7, No.1, pp. 3.
Heizer dan Render, 2016. Manajemen Operasi: Manajemen Keberlangsungan dan Rantai Pasokan. Edisi:11. Diterjemahkan oleh: Hirson Kurnia, dkk. Jakarta: Salemba Empat. Halaman: 349, 433.
Morshed, MN & Kazi SP, 2014. Assembly Line Balancing to Improve Productivity using Work Sharing Method in Apparel Industry. Global Journal of Researches in Engineering: Industrial Engineering, Volume 14 Issue 3 Version 1.0, pp. 39-47.
Ongkunaruk, P, & Wimonrat, W 2014, ‘An ECRS-based line balancing concept: a case study of a frozen chicken producer’, Business Process Management Journal, Volume 20 Issue 5, pp. 678 – 692
Pearce, B 2015. A study on general assembly line balancing modeling methods and techniques. Ph.d dissertation at clemson university- tiger prints. Available from: http://tigerprints.clemson.edu/all_dissertations. pp. 24.
Pertiwi, AFO & Rahmaniyah DA. 2020. Increased line efficiency by improved work methods with the ECRS concept in a washing machine production: a case study. Jurnal Sistem dan Manajemen Industri Vol 4 No 1 July 2020, 13-29.
PT. Kalbe Farma Tbk. 2020. Annual Report PT. Kalbe Farma Tbk 2019, https://www.kalbe.co.id/investor/financial-reports-and-presentations/annual-report. [June 01, 2020]
PT. Tempo Scan Pacific Tbk., 2020. Annual Report PT. Tempo Scan Pacific Tbk 2019, https://www.temposcangroup.com/en/investors/annual-report. [June 05, 2020]
Sivasankaran dan Shahabudeen. (2014). Literature review of assembly line balancing problems. Internasional Journal Advanced Manufacturing Tecnology. Vol. 73, pp. 1667.
Sony, M, 2018. Industry 4.0 and lean management: a proposed integration model and research propositions. Production & Manufacturing Research. Vol.6, No.1, pp. 419.
Stevenson 2009. Operation Management. New York: The McGraw-Hill Companies, Inc. pp. 262.
Tiovani, O & Fakhriana, F. (2019). Perbaikan Proses Produksi Menggunakan ECRS Based Line Balancing pada Lini Perakitan Stator 4. Performa: Media Ilmiah Teknik Industri, Vol. 18, No. 1: 34-45.
Vislavath, S., Priyank S., Mohammad A. & Anshul S. 2016. Line Balancing Heuristics for Productivity Enhancement in Beverage Factory. Indian Journal of Science and Technology, Vol 9(36). pp. 1-9.
Wilson, L 2010, How to implement lean manufacturing. New York: The McGraw-Hill Companies, Inc. pp. 124.
Yin, M & Wei, J. 2016. The Theory of IE Assembly Line Balance and Optimization. 6th International Conference on Machinery, Materials, Environment, Biotechnology and Computer (MMEBC 2016), pp:1778-1782.
Betancourt, Liliana Capacho. 2007. ASALBP: the Alternative Subgraphs Assembly Line Balancing Problem - Formalization and Resolution Procedures. Doctoral Thesis, TECHNICAL UNIVERSITY OF CATALONIA. Page: 7-8.
BPJS Kesehatan. 2020. Ringkasan Eksekutif Laporan Pengelolaan Program dan Laporan Keuangan BPJS Kesehatan tahun 2019 (Auditan). Upload Date : 28 Jul 2020, https://bpjs-kesehatan.go.id/bpjs/arsip/categories/MzA/ publikasi.
Chueprasert, M. and *Ongkunaruk, P. 2015. Productivity improvement based line balancing: a case study of pasteurized milk manufacturer. International Food Research Journal Vol. 22, no.6, pp: 2313-2317
Ejsmont, K, Bartlomiej, G, Donatella C, Fernando C, Wael, MM,& Jose, L, Martinez, L. 2020. Towards ‘Lean Industry 4.0? – Current trends and future perspectives. Cogent Business & Management. Vol 7, No.1, pp. 3.
Heizer dan Render, 2016. Manajemen Operasi: Manajemen Keberlangsungan dan Rantai Pasokan. Edisi:11. Diterjemahkan oleh: Hirson Kurnia, dkk. Jakarta: Salemba Empat. Halaman: 349, 433.
Morshed, MN & Kazi SP, 2014. Assembly Line Balancing to Improve Productivity using Work Sharing Method in Apparel Industry. Global Journal of Researches in Engineering: Industrial Engineering, Volume 14 Issue 3 Version 1.0, pp. 39-47.
Ongkunaruk, P, & Wimonrat, W 2014, ‘An ECRS-based line balancing concept: a case study of a frozen chicken producer’, Business Process Management Journal, Volume 20 Issue 5, pp. 678 – 692
Pearce, B 2015. A study on general assembly line balancing modeling methods and techniques. Ph.d dissertation at clemson university- tiger prints. Available from: http://tigerprints.clemson.edu/all_dissertations. pp. 24.
Pertiwi, AFO & Rahmaniyah DA. 2020. Increased line efficiency by improved work methods with the ECRS concept in a washing machine production: a case study. Jurnal Sistem dan Manajemen Industri Vol 4 No 1 July 2020, 13-29.
PT. Kalbe Farma Tbk. 2020. Annual Report PT. Kalbe Farma Tbk 2019, https://www.kalbe.co.id/investor/financial-reports-and-presentations/annual-report. [June 01, 2020]
PT. Tempo Scan Pacific Tbk., 2020. Annual Report PT. Tempo Scan Pacific Tbk 2019, https://www.temposcangroup.com/en/investors/annual-report. [June 05, 2020]
Sivasankaran dan Shahabudeen. (2014). Literature review of assembly line balancing problems. Internasional Journal Advanced Manufacturing Tecnology. Vol. 73, pp. 1667.
Sony, M, 2018. Industry 4.0 and lean management: a proposed integration model and research propositions. Production & Manufacturing Research. Vol.6, No.1, pp. 419.
Stevenson 2009. Operation Management. New York: The McGraw-Hill Companies, Inc. pp. 262.
Tiovani, O & Fakhriana, F. (2019). Perbaikan Proses Produksi Menggunakan ECRS Based Line Balancing pada Lini Perakitan Stator 4. Performa: Media Ilmiah Teknik Industri, Vol. 18, No. 1: 34-45.
Vislavath, S., Priyank S., Mohammad A. & Anshul S. 2016. Line Balancing Heuristics for Productivity Enhancement in Beverage Factory. Indian Journal of Science and Technology, Vol 9(36). pp. 1-9.
Wilson, L 2010, How to implement lean manufacturing. New York: The McGraw-Hill Companies, Inc. pp. 124.
Yin, M & Wei, J. 2016. The Theory of IE Assembly Line Balance and Optimization. 6th International Conference on Machinery, Materials, Environment, Biotechnology and Computer (MMEBC 2016), pp:1778-1782.
Downloads
Published
2021-08-31
How to Cite
Sitanggang, M., & Hariadi DP, A. . (2021). INCREASING UTILIZATION OF PRODUCTION MACHINERY THROUGH LINE BALANCING APPROACH (CASE STUDY ON PHARMACEUTICAL INDUSTRY). Dinasti International Journal of Education Management And Social Science, 2(6), 1068–1082. https://doi.org/10.31933/dijemss.v2i6.929
Issue
Section
Articles
License
Authors who publish their manuscripts in this journal agree to the following conditions:
- The copyright on each article belongs to the author(s).
- The author acknowledges that the Dinasti International Journal of Education Management and Social Science (DIJEMSS) has the right to be the first to publish with a Creative Commons Attribution 4.0 International license (Attribution 4.0 International (CC BY 4.0).
- Authors can submit articles separately, arrange for the non-exclusive distribution of manuscripts that have been published in this journal into other versions (e.g., sent to the author's institutional repository, publication into books, etc.), by acknowledging that the manuscript has been published for the first time in the Dinasti International Journal of Education Management and Social Science (DIJEMSS).
