Modification Of Measurement Tools On Cmm Machine To Increase The Accuracy Of The Sport Type K64 Production Process

Authors

  • Komarudin Komarudin Universitas Dian Nusantara, Jakarta, Indonesia
  • Aditya Rian Wibowo Mechanical Engineering, Universitas Dian Nusantara, Jakarta, Indonesia

DOI:

https://doi.org/10.38035/dijemss.v6i1.3430

Keywords:

Coordinate Measuring Machine, Swing Arm, Safety

Abstract

New technological innovations in the design and production of motorized vehicles continue to be carried out to maintain product quality and have high-priority safety factors. The tool used by the CMM (Coordinate Measuring Machine) to measure product dimensions must have a very precise level of accuracy. The disadvantage is that it must be measured while still, so it requires tools. The limitation of the problem only focuses on modifying the measuring tools on the CMM machine for the Swing Arm Motor Sport Type K64 product. The aim of this research is to develop measuring tools to achieve tighter dimensional tolerances, increase the accuracy of the production process, and make recommendations for tools to increase measurement accuracy. The method used is a quantitative method. The results obtained show that the simulation and implementation of the K64 swingarm measuring jig show positive and satisfactory results. By modifying the measuring tools on the Coordinate Measuring Machine (CMM), it has succeeded in increasing the accuracy of measuring the K64-type sports motorbike swingarm components. These modifications have a significant impact on improving the accuracy of the swingarm production process in endpiece distance (average deviation percentage 0.05%) and collar distance (average deviation percentage 0.05%), and apart from increasing accuracy, this modification also helps in speeding up the production process and changing the cycle. Time, which was originally 12 minutes, became 8 minutes per unit.

References

Diakses dari https://www.renishaw.com.

Kamaruzaman, M. F., Selamat, A., Mohamed, Z., & Abu Bakar, S. A. R. (2019). A review on coordinate measuring machine (CMM). Procedia Manufacturing, 2, 458–467.

Mitutoyo. (2021). "Coordinate Measuring Machine (CMM) Overview." Diakses dari https://www.mitutoyo.com.

Nawi, M. N. M., Bahari, M. F., & Saharudin, M. S. (2018). A review on coordinate measuring machine (CMM). IOP Conference Series: Materials Science and Engineering, 342(1), 012064.

Renishaw. (2020). "Advancements in CMM Technology for Automotive Manufacturing."

Saluja, S., & Sooch, T. (2020). A Review on Coordinate Measuring Machine (CMM). International Journal of Engineering Research and Applications, 3(3), 1712–1716.

Santoso, E. (2019). Peningkatan Akurasi Pengukuran dengan Modifikasi Alat Bantu pada Mesin CMM. Disertasi, Universitas Gadjah Mada.

Downloads

Published

2024-10-16

How to Cite

Komarudin, K., & Rian Wibowo, A. (2024). Modification Of Measurement Tools On Cmm Machine To Increase The Accuracy Of The Sport Type K64 Production Process. Dinasti International Journal of Education Management And Social Science, 6(1), 229–240. https://doi.org/10.38035/dijemss.v6i1.3430

Issue

Vol. 6 No. 1 (2024): Dinasti International Journal of Education Management and Social Science (October - November 2024)

Section

Articles

License

Copyright (c) 2024 Komarudin Komarudin, Aditya Rian Wibowo

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish their manuscripts in this journal agree to the following conditions:

  1. The copyright on each article belongs to the author(s).
  2. The author acknowledges that the Dinasti International Journal of Education Management and Social Science (DIJEMSS) has the right to be the first to publish with a Creative Commons Attribution 4.0 International license (Attribution 4.0 International (CC BY 4.0).
  3. Authors can submit articles separately, arrange for the non-exclusive distribution of manuscripts that have been published in this journal into other versions (e.g., sent to the author's institutional repository, publication into books, etc.), by acknowledging that the manuscript has been published for the first time in the Dinasti International Journal of Education Management and Social Science (DIJEMSS).