PERFORMANCE ANALYSIS OF GREEN SUPPLY CHAIN MANAGEMENT OF DIAPER RAW MATERIALS
DOI:
https://doi.org/10.31933/dijdbm.v1i3.219Keywords:
Supply Chain Performance, GSCM, SCOR, AHP.Abstract
- X is a company engaged in manufacturing and it is necessary to do a performance measurement in improving supply chain management to be an environmentally friendly Green Supply Chain management. The purpose of this study is to determine the current condition of the company's SCM and then analyze the value of the performance of green supply chain management and propose improvements to the company after knowing the most influential indicators in order to improve the performance of green supply management in the company. Based on the problems studied, the method used in the study is to measure the performance of the company's supply chain using the Supply Chain Operation References (SCOR) method. The initial hierarchy model of performance measurement is adjusted to the condition of the company to measure the performance of its supply chain, while the normalization of Snorm De Boer serves to equalize the matrix value used as an indicator of measurement. The importance of performance attributes is measured based on weighting with subjective questionnaires using AHP. SCM Conditions of PT. X it is known that there are two stages of SCM that have low KPI values, namely manufacturing and distribution. Green supply chain performance measurement results obtained that the calculated performance value is 67.95. This value indicates that the achievement of the performance of the green supply chain management is classified as average and needs to be improved, especially for indicators that have low values
References
Arikunto, S., & Pendekatan, P.P.S. (2009). Praktek. Jakarta : Penerbit Rineka Cipta.
[2] Azari, S. Baihaqi, I. dan Bramanti, G. W. (2018). “Identifikasi Risiko Green Supply Chain Management di PT Petrokimia Gresik”. Jurnal Sains dan Senu Pomits. Vol. 7, No. 1, 2337-3520.
[3] Djunaidi, Much. M. Abdul Azis Sholeh. Nur Muhammad Mufiid. (2018). “Identifikasi faktor Penerapan Green Supply Chain Management Pada Industri Furniture Kayu”. Jurnal Teknik Industri. Vol. 19, No. 1, pp. 1-10. ISSN 1978-1431.
[4] Ilhamizar, Muhammad Aditya. Ari Yanuar Ridwan . Mohammad Deni Akbar. (2018). “Perancangan Sistem Monitoring Kinerja Distribusi Produk Beras Menggunakan Metode SCOR dan AHP Pada Bulog Subdrive Bandung”. e-Proceeding of Engineering. Vol.5, No.3. ISSN : 2355-9365.
[5] Khair, Fauzi. Dendhy Indra Wijaya. (2019).” Perancangan Pengukuran Kinerja Sistem Rantai Pasok Perusahaan Injeksi Plastik Menggunakan Lean & Green Supply Chain Management (LGSCM)”. Jurnal Penelitian dan Aplikasi Sistem & Teknik Industri (PASTI). Vol. XIII, No. 1. 48-60. e-ISSN 2598-4853.
[6] Munthafa, Agnia Eva. Husni Mubarok. (2017). “Penerapan Metode Analitycal Hierarchy Process Dalam Sistem Pendukung Penentuan Mahasiswa Berprestasi”. Jurnal Siliwangi. Vol.3. No.2. ISSN 2477-3891.
[7] Ridwansyah, M. Dewi, Nusraningrum. Ahmad H. Sutawijaya. (2019).”Analisis Overall Equipment Effectiveness untuk Mengendalikan Six Sigma Losses Pada Mesin Pembuatan Nugget” Jurnal Ilmiah Manajemen & Bisnis. Vol 3, No 1 (2019). e-ISSN: 2598-4888.
[8] Shamsuddin, Alina. Eta Wahab. Nor Hazana Abdullah. Fawad Habib Qazi. (2017). “Green Supply Chain Implementation in Manufacturing Industry : A Case Study”. International Journal of GEOMATE. Vol.13, Issue 38, pp.31-37.
[9] Susanty, Aries. Haryo Santosa. Fani Tania. (2017). “Penilaian Implementasi Green Supply Chain Management di UKM Batik Pekalongan dengan Pendekatan GreenSCOR”. Jurnal Ilmiah Teknik Industri. Vol.16 (1), 55 – 63. e-ISSN 2460-4038
[10] Sutawidjaya, Ahmad, H. Lenny Ch Nawangsari. Suharno. (2017). “A Framework Distribution Strategis on Green Supply Chain Management”. Seminar Nasional Inovasi Dan Aplikasi Teknologi Di Industri. ISSN 2085-4218.
[11] Sutawidjaya, Ahmad, H. Eri, Marlapa (2016). “Supply Chain Management: Analisis dan Penerapan Menggunakan Reference (SCOR) di PT. Alfin Permatajaya”. Jurnal Ilmiah Manajemen. Volume VI, No. 1, 121-138.
[12] Paul, John. (2014), Transformasi Rantai Suplai Dengan Model SCOR, Jakarta : Penerbit PPM.
[13] Pujawan, I, Nyoman. Mahendrawathi. (2017). Supply Chain Management, edisi 3, Surabaya : Penerbit Andi Yogyakarta.
[14] Wafdah, Al, Lazuardian. (2016). “Implementasi Sistem Pengukuran Kinerja Aktivitas Green Supply Chain Management (GSCM) (Studi Kasus: KUD “DAU”)”. Jurnal Akuntansi. AKRUAL 8 (1) (2016): 44-61 e-ISSN: 2502-6380.
[2] Azari, S. Baihaqi, I. dan Bramanti, G. W. (2018). “Identifikasi Risiko Green Supply Chain Management di PT Petrokimia Gresik”. Jurnal Sains dan Senu Pomits. Vol. 7, No. 1, 2337-3520.
[3] Djunaidi, Much. M. Abdul Azis Sholeh. Nur Muhammad Mufiid. (2018). “Identifikasi faktor Penerapan Green Supply Chain Management Pada Industri Furniture Kayu”. Jurnal Teknik Industri. Vol. 19, No. 1, pp. 1-10. ISSN 1978-1431.
[4] Ilhamizar, Muhammad Aditya. Ari Yanuar Ridwan . Mohammad Deni Akbar. (2018). “Perancangan Sistem Monitoring Kinerja Distribusi Produk Beras Menggunakan Metode SCOR dan AHP Pada Bulog Subdrive Bandung”. e-Proceeding of Engineering. Vol.5, No.3. ISSN : 2355-9365.
[5] Khair, Fauzi. Dendhy Indra Wijaya. (2019).” Perancangan Pengukuran Kinerja Sistem Rantai Pasok Perusahaan Injeksi Plastik Menggunakan Lean & Green Supply Chain Management (LGSCM)”. Jurnal Penelitian dan Aplikasi Sistem & Teknik Industri (PASTI). Vol. XIII, No. 1. 48-60. e-ISSN 2598-4853.
[6] Munthafa, Agnia Eva. Husni Mubarok. (2017). “Penerapan Metode Analitycal Hierarchy Process Dalam Sistem Pendukung Penentuan Mahasiswa Berprestasi”. Jurnal Siliwangi. Vol.3. No.2. ISSN 2477-3891.
[7] Ridwansyah, M. Dewi, Nusraningrum. Ahmad H. Sutawijaya. (2019).”Analisis Overall Equipment Effectiveness untuk Mengendalikan Six Sigma Losses Pada Mesin Pembuatan Nugget” Jurnal Ilmiah Manajemen & Bisnis. Vol 3, No 1 (2019). e-ISSN: 2598-4888.
[8] Shamsuddin, Alina. Eta Wahab. Nor Hazana Abdullah. Fawad Habib Qazi. (2017). “Green Supply Chain Implementation in Manufacturing Industry : A Case Study”. International Journal of GEOMATE. Vol.13, Issue 38, pp.31-37.
[9] Susanty, Aries. Haryo Santosa. Fani Tania. (2017). “Penilaian Implementasi Green Supply Chain Management di UKM Batik Pekalongan dengan Pendekatan GreenSCOR”. Jurnal Ilmiah Teknik Industri. Vol.16 (1), 55 – 63. e-ISSN 2460-4038
[10] Sutawidjaya, Ahmad, H. Lenny Ch Nawangsari. Suharno. (2017). “A Framework Distribution Strategis on Green Supply Chain Management”. Seminar Nasional Inovasi Dan Aplikasi Teknologi Di Industri. ISSN 2085-4218.
[11] Sutawidjaya, Ahmad, H. Eri, Marlapa (2016). “Supply Chain Management: Analisis dan Penerapan Menggunakan Reference (SCOR) di PT. Alfin Permatajaya”. Jurnal Ilmiah Manajemen. Volume VI, No. 1, 121-138.
[12] Paul, John. (2014), Transformasi Rantai Suplai Dengan Model SCOR, Jakarta : Penerbit PPM.
[13] Pujawan, I, Nyoman. Mahendrawathi. (2017). Supply Chain Management, edisi 3, Surabaya : Penerbit Andi Yogyakarta.
[14] Wafdah, Al, Lazuardian. (2016). “Implementasi Sistem Pengukuran Kinerja Aktivitas Green Supply Chain Management (GSCM) (Studi Kasus: KUD “DAU”)”. Jurnal Akuntansi. AKRUAL 8 (1) (2016): 44-61 e-ISSN: 2502-6380.
Downloads
Published
2020-04-19
Issue
Section
Articles
License
Authors who publish their manuscripts in this journal agree to the following conditions:
- The copyright on each article belongs to the author(s).
- The author acknowledges that the Dinasti International Journal of Digital Business Management (DIJDBM) has the right to be the first to publish with a Creative Commons Attribution 4.0 International license (Attribution 4.0 International (CC BY 4.0).
- Authors can submit articles separately, arrange for the non-exclusive distribution of manuscripts that have been published in this journal into other versions (e.g., sent to the author's institutional repository, publication into books, etc.), by acknowledging that the manuscript has been published for the first time in the Dinasti International Journal of Digital Business Management (DIJDBM).
